How to set orientation of silicon

I would like to simulate 3D solid mechanics eigenfrequency study,
with just simple rectangular waveguide.
My rectangular waveguide is just 400um x 80um x 40um,
I set Fixed constraints at both end, and used normal mesh.

Finally material is Si - silicon(single crystal, anisotropic).

Here was the problem. the material I choose was crossed with red cross.
Also, there were STOP signs at Young's modulus and Poisson ratio.

Ofcourse, clicking the study gives me an error, saying

-------------------------
Undefined variable.
- Variable: material.nu
- Geometry: geom1
- Domain: 1
Failed to evaluate Jacobian of expression.
- Expression: (-(2*comp1.solid.Sl12))*dvol
Failed to evaluate Jacobian of expression.
- Expression: (-comp1.solid.Sl11*test(comp1.solid.el11)-2*comp1.solid.Sl12*test(comp1.solid.el12)-2*comp1.solid.Sl13*test(comp1.solid.el13)-comp1.solid.Sl22*test(comp1.solid.el22)-2*comp1.solid.Sl23*test(comp1.solid.el23)-comp1.solid.Sl33*test(comp1.solid.el33))*(dvol)
- Feature: Eigenvalue Solver 1 (sol1/e1)
-------------------------

So, How do I implement anisotropic silicon with crystal orientation <100> into this model? (as well as <110>

---------------------
well i found the forum,
www.comsol.com/community/forums/general/thread/2329

but it was in 2009. where on earth is Orientation/Condition?